Safety first, high and low temperature test chamber installation precautions
High and low temperature test chambers can be divided into "alternating test" and "wet heat test" according to the test method and industry standards. Both test methods are upgraded and expanded on the basis of high and low temperature test chambers. What are the matters? The following are some of the points that Xiaobian has summarized in years of industry experience: Ladies Skirts,Ladies Printed Skirts,Ladies Chiffon Skirts,Ladies Denim Skirt SHAOXING NEWTEX IMP.&EXP. CO., LTD , https://www.newtexgarment.com
1. Keep enough maintenance space between the equipment and adjacent walls or other equipment after installation;
2. The ambient temperature of the installation site should not change drastically. It is best to keep it at 15~25°C throughout the year;
3. When the equipment is in non-working conditions, the high and low temperature test chambers should be kept dry, the waste water after operation should be discharged, and the studio and the cabinet should be dried with a soft cloth;
4. The equipment should be placed in a well-ventilated place (it is recommended to install a ventilation fan to keep the room ventilated);
5, should not be installed in places with a lot of dust;
6. Prohibit the exposure of chemicals to this equipment;
7. The wastewater discharge system of the equipment must be installed in place;
8. After each test, the constant temperature and humidity test chamber should take out the sample and clean the equipment liner.
The high and low temperature alternating test chamber means that the temperature, humidity and time that need to be done can be set in the instrument parameters at one time, and the test box will follow the set procedure. The high-low temperature damp heat test chamber is a humidifying heat system based on the temperature, so that the temperature can be tested at the same time as the humidity, so that the test effect is closer to the natural climate, and the harsher natural climate is simulated, thereby making the tested sample reliable. higher.