Why is fabric insufficient?

2, lack of moisture recovery. After printing and dyeing fabrics, there is a lot of moisture loss when drying, and the specification of the fabric refers to the grammage under the standard moisture regain. Therefore, when the weather is dry and the dried fabric does not fully regain moisture, the grammage will be insufficient, especially the natural fibers such as cotton, silk, and wool, and the deviation will be very large.

3. The original yarn wears more during the weaving process, which will cause too much hairiness to fall off resulting in finer yarns and lower grammage.

4. Restaining during the dyeing process will result in a large loss of yarn and a reduction in yarn weaving.

5. In the process of singeing, the singeing fire force causes the cloth surface to be too dry, and the yarn is damaged when the desizing process leads to thinning.

6, mercerized when the yarn damage to the yarn.

7. Grinding and finishing the damage to the fabric.

8, the final is the density did not meet the process requirements. Did not produce according to specifications, weft density, lack of dense.